error: This Content is protected !!
Preloader Close

Manufacturer and Connoisseur of Activated Carbon

  • Let's Get Social
  • Call Us Today

    (+91) 9173450327

  • Customer Helpdesk

    24*7 Online

  • Headquarters


Granular Activated Carbon

GAC is a form of irregular shaped activated carbon with particle size greater than 0.2 mm (70 ASTM Mesh).

Owing to their larger particle size compared to PAC and superior mechanical properties they are mainly used in applications with rigorous process conditions such as high flow rate and pressure drop. Particle sizes between 0.2 to 2 mm are typically used for liquid phase applications because rate of adsorption whereas is more important than pressure drop issue and between 2 to 5 mm are typically used for gas/vapor phase applications because pressure drop is a more critical factor than rate of adsorption.

SpaceBlack Adsorbents provides GAC derived from 2 raw materials viz., coal and coconut shell, each available in various mesh sizes and standard as well as customizable properties. We have the capability to manufacture GAC through both steam activation and chemical activation routes. We also offer unwashed, water washed and acid washed grades with tailorable adsorption properties.

Grades Series

Commonly Used For

Municipal Drinking Water

To remove DBPs, taste and odour compounds, pesticides, algal toxins, bacteria, viruses, endocrine-disrupting compounds, pharma and cosmetic compounds, and other organic matter

Municipal Waste Water

To remove organic matters, colour and odorous compounds, pharmaceutical compounds, cosmetic products, endocrine disrupting compounds, hormones, iodinated contrast media, and contaminants of emerging concern 

Industrial Waste Water

To remove organic compounds (COD & BOD), colour and odour compounds, industrial chemicals, surfactants, pesticides, aromatic hydrocarbons, organic halides, etc.  

Remediation Water

To remove a variety of contaminants such as COD & BOD, VOCs, aromatic hydrocarbons, hydrogen sulfide, perflourinated compounds, perchlorates, PAHs, MTBEs, THMs, TCEs, tetrachloroethylenes, and colour compounds

Ultrapure Water

To remove traces of organic and inorganic compounds, metals, dissolved minerals and particulate substances, and dissolved gases

Industrial Process Water

To achieve specific levels of demineralization, deionization or softening of water 

Domestic Water (POU/POE)

To remove organic compounds such as pesticides, herbicides, phenols, aliphatic and aromatic hydrocarbons and their chlorinated counterparts, dyes, surfactants, organic sulfur compounds, ethers, amines, nitro compounds, and endocrine disrupting compounds

Aquariums & Ponds

To reduce organic contaminants in water such as COD & BOD, organic halogens, pesticides, chloramines, acetone, methylene chloride, trichloroethylene, toluene, xylene, naphthalene, phenol, tannins, colours, and other toxic substances

Landfill Leachates

To remove the organic contaminants, PFAS, colour bodies, and other toxic compounds

Flue Gas

To remove mercury, VOCs, dioxins and furans from flue gas emissions in air  

Industrial Process Air

To ensure specific purity of air required for production of metals, chemicals, solvents, and gases

Odour Removal

To contain and remove odorous impurities from air such as organic compounds, hydrogen sulphide, amines, and mercaptans

Remediation Air

To remove high concentrations of organic pollutants in air from remediation sites such as soil venting and air stripping

Solvent Recovery

To mitigate loss of volatile hydrocarbon solvent vapours in air

Acid And Alkali Gases

To remove acidic gases such as hydrogen sulphide and sulphur dioxide and basic gases such as ammonia and sodium hydroxide from air

Cigarette Filters

To filter toxic gases produced during burning of cigarettes without affecting the flavor and aroma of the smoke

Cabin Air

To prevent organic pollutants and malodorous compounds from circulating inside car

Natural Gas

To remove hyrogen sulfide, mercaptans, traces of mercury and other impurities from natural gas

Pressure Swing Adsorption

To separate one or more components from a gaseous mixture

Compressed Gas

To remove traces of oil, hydrocarbons and other impurities from recycled compressed gas

Reformer Gas

To remove unwanted by-products such as hydrogen gas and light hydrocarbons from catalytic reformer gas

Gas Storage

To store large volumes of gas such as methane, carbon dioxide and nitrogen at relatively low pressures 


To combat the issue of gasoline vapour emissions from vehicle engines

Fruit Storage

To capture carbon dioixe and ethylene from scrubber systems used in fruit storage facilties


To separate or purify the petrochemical products from by-products (such as HPNAs formed during hydrocracking) and impurities (such as traces of oil in steam condensate)

Edible Oils

To remove colour impurities (such as tannins and anthocyanins) and organic toxins (mainly PAHs) from crude oil

Soft Drinks & Alcohols

To purify water and CO2 used in soft drinks; modify colour and taste of alcohols; remove odour from fermentation process; provide aging stability    

Fruit Juices

To remove patulin from fruit pulp and improve colour and flavour 

Raw Sugar

To decolorize raw sugar by removal of colour impurities such as caramel, polyphenols, and melanoidins


To remove undesirable colour and taste as well as unwanted by-products formed during production of sweeteners


To reduce bulk colour and fatty acids of crude glycerine and control ageing of final product


To remove colour, taste, odour and other organic impurities from raw collagen

Tapioca Starch

To remove unwanted organics and dirt impurities from from cassava root extract 

MSG & Lactic Acid

To remove fermentation based colour and organic impurities during production of MSG and lactic acid


To refine ingredients used in manufacturing of vitamin supplements

Tea & Coffee

To decaffeinate or optimize the caffeine content in tea and coffee

Food Additive

To be used as a food colorant in bakery items, ice creams, candies, etc.




To adsorb the gold metal complex by passing through a series of vessels in countercurrent direction to the the flow of pulp 




To be used in face masks for protection against various airborne pollutants, NIOSH gases, organic vapours, acidic/basic gases, etc.


To be used in industrial respirators for protection against various industrial chemical vapours 


To be used in full-proof gas masks for protection against chemical, biological, radiological and nuclear gaseous (CBRN) agents